Thread
:
2005 parking brake adjustment
View Single Post
06-12-2012, 04:26 PM
smj999smj
Master Enthusiast
2006 Pathfinder
2003 Frontier King Cab
2003 Frontier KC SVE 4x4
Join Date: Jun 2012
Location: Prospect, VA
Posts: 1,866
Here's what the ALLDATA states in regards to parking brake adjustment:
:
2005 Nissan-Datsun Truck Pathfinder 4WD V6-4.0L (VQ40)
Vehicle Level
Brakes and Traction Control
Parking Brake System
Parking Brake Control
Adjustments
Adjustments
ADJUSTMENT
Remove lower instrument panel LH. Refer to "LOWER INSTRUMENT PANEL LH".
Partially engage parking brake pedal to access adjusting nut.
Insert a deep socket wrench to rotate adjusting nut and loosen cable until tension is sufficiently released. Then, disengage the parking brake pedal.
Remove the wheel and tire using power tool.
Remove the rotor and measure inner diameter at widest point using tool. Tool number: - (J-21177-A)
Transfer measurement less 0.6 mm to the
parking brake shoes
and adjust accordingly.
Using wheel nuts, secure the disc to the hub to prevent it from tilting.
Rotate disc rotor to make sure there is no drag.
Adjust cable as follows:
Operate pedal 10 or more times with a force of 490 N (50 kg, 110 lbs.).
Rotate adjusting nut with deep socket to adjust pedal stroke to specification. Pedal stroke: 4 - 5 notches [under force of 196 N (20.0 kg, 44.1 lbs.)]
With parking brake pedal completely disengaged, make sure there is no drag on the parking brake.
smj999smj
View Public Profile
Send a private message to smj999smj
Find all posts by smj999smj