Quote:
Originally Posted by BazPath
I guess this may be a bigger problem that I thought :( I will check again today, but I am 99% sure I did not see any female connections on the inside part of the frame. Assuming that is the case, which wires should I tap into to achive the desired result of having power for my trailer lights? Thanks.
|
OK lay on your back under the rear of the truck. Look up at the spare tire. Look to your right at the frame rail. You will see the connectors with wires only going into one side. The other side has a blank plug that you have to take out to plug the connectors in. You can't miss them.
If you are not seeing them they are probably not there. Is this a 2wd model?