View Single Post
 
Old 05-30-2009, 09:42 PM
BazPath
Guest
 
Posts: n/a
Default

Hi there. The 7 pin Nissan harness I purchased is the same one that can be found in the link you provided.

I can see a grey male plug going into a female plug on top of a big black box right behind the wheel well, but I could not see the "2 wire flat black female reseptacle". Will I need to take off the lining or the bog black box to have better access to that location? I will go under and see what else is in there, but I looked :(

I am still assuming that the two plugs from the harness will plug into 1) the existing plug on top of the big black box (I still have no idea what that is for?) and 2) the smaller plug will fit into the smaller female plug you just described? If you have a picture of what I need to look for under there, it would be of great help.

It still baffles me why our Nissan Pathfinders did not come with the proper wiring!!! Although I do not have no need for a brake controller, do I still need to install a jumper in the fuse box as I had read earlier?

Thanks.
Reply With Quote