Sounds like a bad step motor.
Component Inspection
STEP MOTOR
1. Turn ignition switch OFF.
2. Disconnect CVT unit harness connector.
3. Check resistance between CVT unit harness connector termi-nals
and ground.
4. If NG, replace the transaxle assembly.
Control valve Connector Terminal Resistance
(Approx.)
Step motor F6
6 - 7 30 ohms
8 - 9 30 ohms
6 - Ground 15 ohms
7 - Ground "
8 - Ground "
9 - Ground "
__________________
Nissan Master certified Technician
Hybrid and GTR certified
EV certified
ASE Master Certified.
|