View Single Post
 
Old 10-24-2008, 03:38 AM
tech22's Avatar
tech22 tech22 is offline
Master Enthusiast
2005 Frontier Crew Cab Frontier Crew Cab
05 nissan frontier
 
Join Date: Jan 2008
Location: alliance,ohio
Age: 70
Posts: 2,049
Default

Take your wrench and cut it in half. It's not an easy job but you can do it.Make sure you have a new gasket on hand.To Lewg...With 310k you might want to clean the manifold ports.Look stright down between the intake runners and you will see 4 counter sunk hex plugs. Remove them and with a long screwdriver insert stright down and tap the ports open.Carbon will have more than likely comepletely covered them.If they are clogged you will see hi exhaust gas temps and the system will not function properly.Good luck on your repair.
Reply With Quote