View Single Post
 
Old 12-26-2007, 05:58 PM
mbrans
Guest
 
Posts: n/a
Default Problem found

After some continuing trouble shooting I found the problem to be the terminal for the white signal wire that plugs into the crank sensor was not making good contact with the crank sensor prong. I was able to find the problem when I put an ohmeter on the prongs coming out of the sensor and getting a reading from the sensor, but no ohm reading between the wires once the wires were plugged into the sensor. I did a temporary fix by putting a small piece of foil into the plug holes. Car starts fine now and I am looking for a new pigtail from a wrecking yard.
Thanks
Reply With Quote